Add price you are willing to pay for the product: (SYS-2026TT-DLIBQRF)

Supermicro SYS-2026TT-DLIBQRF System System 2026tt Dlibqrf 2u 1400w Lga1366 Ddr3 Pci Express Sata Sas Retail

SKU: AZTEKQR4ZR | Mfg. Part: SYS-2026TT-DLIBQRF | UPC: 672042082896 | 1 reviews | Share Make an offer

Out of Stock

Special Price $3798.75 Regular Price $5128.31

Condition: New

Quantity:

Free Shipping for this Item

Supermicro SYS-2026TT-DLIBQRF System System 2026tt Dlibqrf 2u 1400w Lg

Supermicro System SYS-2026TT-DLIBQRF 2U 1400W LGA1366 DDR3 PCI Express SATA/SAS Retail

Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Intel� Xeon� processor 5600/5500 series, with QPI up to 6.4 GT/s

2. 12 DIMM, up to 192GB DDR3 1333/ 1066/800 MHz ECC Reg. memory

3. 2 (x8) PCI-E 2.0 (in x16, low-profile)

4. Integrated IPMI 2.0 with KVM and Dedicated LAN 5. Dual Intel� 82574L Gigabit Ethernet Controller

6. 12x 2.5" Hot-swap SAS2/SATA/SSD HDDs (24 total)

7. One LSI 2008 adapter card

8. 1400W Gold-level High-efficiency Redundant Power Supply

9. Mellanox ConnectX QDR Infiniband 40Gbps Controller w/ QSFP connector

Vendor:	Supermicro
MPN:	SYS-2026TT-DLIBQRF
UPC:

Detail Specifications

System Memory:
Memory Capacity:
12x 240-pin DIMM sockets
Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
Memory Type:
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes:
1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage:
1.5 V
Error Detection:
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices (per Node) :
Infiniband:
Mellanox ConnectX QDR Infiniband 40Gbps Controller
Chipset:
Intel 5520 (Tylersburg) chipset
ICH10R + IOH-36D
SATA:
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support
SAS:
LSI 6Gbps SAS 2008 IT Mode BPN-ADP-E16-L
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond WPCM450 BMC
Network Controllers:
Dual Intel 82574L Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics:
Matrox G200eW
Super I/O:
Winbond W83527HG chip
Clock Generator:
932S421 chip

Input / Output (per Node) :
SAS2:
6x SAS2 ports
6x SAS2 hard drives supported
LAN:
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB:
2 rear + 1 header (2 Ports)
4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA:
1x VGA Port
Serial Port:
1 Fast UART 16550 serial port
Infiniband:
1 External QSFP Infiniband Connector

System BIOS (per Node) :
BIOS Type:
32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features:
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support

Dimensions:
Height:3.5" (88mm)
Width:17.2" (438mm)
Depth:26.75" (679mm)
Gross Weight:85 lbs (38.6kg)
Available Colors:Black

Front Panel (per Node) :
Buttons:
Power On/Off button
UID button
LEDs:
Power LED (on power button)
Network activity LED
System Overheat/fan fail/power fail/ LED
UID LED (on UID button)

Expansion Slots (per Node) :
PCI-Express:
2 (x8) PCI-E 2.0 (in x16, low-profile)

Drive Bays (per Node) :
Hot-swap:
12x 2.5" SAS2/SATA Hot-swap drive bays

Hard drive Backplane:
2U Hard drive Backplane for 24x 2.5" HDD

System Cooling:
Fans:
4x 8cm 9.5K RPM 4-pin PWM Cooling Fans

PC Health Monitoring:
CPU:
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
CPU Core 6-Phase-switching voltage regulator
FAN:
Total of four 4-pin PWM fans
4x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Temperature:
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 4x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED:
Power Fail / Overheat LED
Suspend-state Indicator LED
UID LED
Other Features:
SDDC Support

RoHS:
RoHS Compliant

Item Dimension (L"xW"xH") :
26.75 x 17.2 x 3.5

Warranty Information:
1 Year